NestBox

Billit · Post by **Billit** » Sat Sep 03, 2005 5:53 am

Hi there, I need to know how a NestBox looklike. I want to make a Nestbox for my Ringnecks. Kindly, tell me how the interior looklike as well as the best dimension. Hope you could help me. Thanks.

skray · Post by **skray** » Fri Oct 14, 2005 1:32 pm

I use nest boxs made from 1'' thick pine.Make them 10''x10''x24''.
Kenny Ray
http://www.raysaviary.com

Billit · Post by **Billit** » Fri Oct 14, 2005 3:33 pm

skray wrote:I use nest boxs made from 1'' thick pine.Make them 10''x10''x24''.
Kenny Ray
http://www.raysaviary.com

Thanks for the dimension Kenny.
Do you know how the Inside Part look like? Is there any compartment there, backdoor, viewing window.
Hope you could share how your nestboxes look like specially the inside part.

skray · Post by **skray** » Fri Oct 14, 2005 3:48 pm

The nest box is shaped like a grandfather clock. It is 10X10 in. by 24 in tall. No compartments on the inside just a sliding door on the back that slides up. In the front a 3 inch hole is a good start. The birds will often chew it wider. I also use a piece of cage wire about 3 in. wide that goes from the hole down to the bottom of the inside of the nest box. Hope this isn't confusing.

Kenny Ray
http://www.raysaviary.com